Particulate matter sample is pulled by a vacuum pump and concentrated on filter tape spot, the concentrated sample is advanced to measuring position where between beta raysource and detector.
Particulate matter sample is pulled by a vacuum pump and concentrated on filter tape spot, the concentrated sample is advanced to measuring position where between beta raysource and detector. An attenuation signal of beta ray is detected which represents the mass of sample particulate. Particulate concentration can be determined by dividing mass to volume which has been strictly controlled during sampling with fixed flow rate.
SGD-710C is a calibration standard gas divider used for environmental analysis.
The most powerful handheld MULTIGAS ANALYSER for industrial combustions, emission, and process monitoring using up to 7 sensors, including O2, CO, CO2, NO, NO2,…
The calibration unit OZGU-370SE is designed for the dynamic and continual manufacture of zero and span gas to perform all ongoing quality control procedures…
The SGGU-610/640 are designed to supply the zero and span gases required for calibrating an air pollution monitoring system.












