Condensate accumulates most probably while wet sample gas is processed through a conditioning system.
Source / Stack Emission Monitoring
We will finalise a price once we receive your enquiry.
Condensate accumulates most probably while wet sample gas is processed through a conditioning system. On one hand this may occur inadvertently if thermal bridges occur in the sample gas lines. On the other hand, the deposit of moisture is necessary to protect the measuring cells in the analyser from damage and/or stabilise measurements.
Since the sample gas is often conveyed through the analysis system with suction, the condensate must be pumped off to remove it. So-called peristaltic pumps are particularly suited for this purpose. They systemically protect the sample gas system from external air and based on the hose material used offer high resistance against the often times highly corrosive condensate. The CPsingle and CPdouble pump series were developed specifically for these severe operating conditions.
Hydrogen generator for FID hydrocarbon analysers, with 99.99p% purity.
The APMA-380 is an analyser for measuring carbon monoxide in ambient air and other background gases, for air quality control as well as for…
Zero Gas Generator ZNV-7 has been developed to check the zero point and dilute the span gas sources in order to carry out the…
APNA-370/CU-2 Ambient Ammonium Monitor measures increased nitrogen oxide (NOx) raected through oxide catalyst treatment as Ammonia (NH3) concentration with chemiluminescent (CLD) method.
